Gather the Right Hardware
Before you begin, gather the following tools:
A new SSD A T6 Torx screwdriver Philips #00 screwdriver SATA to USB cable Spudger tool
Format Your SSD
Before you can do anything with your new SSD, you need to format it.
Attach your SSD to your MacBook Pro using a SATA to USB cable. If you see a popup message when you plug in your SSD warning about readability, select Initialize. Launch Disk Utility and look for your SSD under the External label in the left column. Choose Erase from the top row of options. In the dialog box, enter a new name and select macOS Extended (Journaled) and GUID Partition Table from the drop-down menus. Select Erase to format your SSD and ready it for use. When the formatting process finishes, click Done.
Clone Your Hard Drive With Cloning Software
As outlined below, after formatting your SSD, clone your Mac hard drive using Disk Utility or cloning software such as SuperDuper.
Open SuperDuper and select your hard drive in the Copy drop-down menu, the new SSD in the to column, and Backup - all files from the using drop-down menu. After you make your selections, choose Copy Now. Select Copy to begin. A progress box will appear indicating when each phase of the process is complete. This could take a long time, depending on how much data you need to clone. Press OK when cloning completes. Your SSD now contains all your files and a bootable copy of macOS. You can eject it and power down your computer to begin the installation.
Remove the Internal HDD and Insert the SSD
Swap your internal HDD with a new SSD with these general steps.
Power off your MacBook Pro if you haven’t already done so. Turn your MacBook Pro upside down so the bottom case faces upright. Remove all of the screws using the Philips #00 screwdriver and gently remove the lid. Carefully set the screws aside in an orderly way so you can easily reattach them in the right spots later. Next, look for the battery connector above the battery. Use the spudger tool to work it away from the socket gently. Locate your hard drive and loosen (but don’t try to remove) the screws on the hard drive bracket at the top of the device. When loose enough, remove the bracket. Use the tab on the top of the hard drive to gently lift it up and away from the compartment. Transfer this adhesive tab to your new SSD in the same spot for easier handling. Remove the hard drive connector cable away from the left edge of the hard drive by gradually pulling it away from the device. Transfer the four T6 Torx screws (with the T6 Torx screwdriver) on each corner of your hard drive to your new SSD. Attach the connector cable to the SSD, place it back in the cradle, and secure the hard drive bracket. Put the battery connector firmly into the socket if you loosened it, and reattach the bottom lid of your laptop.
Is a MacBook Pro SSD Upgradeable?
Newer MacBook Pro models from 2016 with Retina displays and Touch Bars aren’t easily upgradeable, as the SSD is soldered on. If you want a hardware upgrade, your best bet is to contact Apple Support.
The general process outlined above should work if you have an older MacBook Pro from 2015 and earlier. You can also consult the manufacturer of the SSD to make sure your MacBook Pro model is compatible.
Will an SSD Make My MacBook Pro Faster?
SSDs are considerably faster, more efficient, and offer more durability than hard disk drives, which means upgrading your MacBook Pro’s HDD with a new SSD can make it feel almost brand new.
If your MacBook boots and loads applications slowly, you’ll notice an instant improvement with an SSD. You could also see better battery performance and temperature regulation.
